Platforms Air & Vacuum - Italian Innovation 
Hot Air high power - high precision, SMT Rework with unique
air flow control at the fingers touch - Dual Air system
No need to change nozzle for most sizes components thanks to the Etneo
technology
Convection Reflow Model ETF K Macro*
Featuring:
- Continuous Heat Temp Settings: 50°C to 500°C
- Pump incorporated for easy portable
- Microprocessor Electronic Temp Control with Zero Switching
- Fine and quick heater with high power
- Air flow control on the tool (push buttons: plus - minus - go)
- Air volume from 0 to 21 Litres/minute
- ESD Safe design
- Ergonomic tool design
- Large LED display for Temp setting - and hot bar LEDs for air flow amount
- Ideal for Soldering/Desoldering SMT large fine - ultra fine pitch components & BGA
- The operator, thanks to the air tool control can concentrate on his job
- Minimizes rework time & increases productivity
- Eliminates: Thermal Stresses and Thermal Shock
- Non contaminations to the delicated ceramic smt and cbga
* The system can be supply to work with N2 Source. In This case the tool flow will be only N2, controlled in volume by the handle finger switch controls
SMD PLATFORM- MODEL: ETF 2K smd - Hot Air Flow a nd F Soldering
Hot Air Tool model ETH 24 AIR with handle flow control - Iron System F 90W
HOT AIR SECTION |
SOLDERING SECTION |
| Power: 200W Tool Voltage: 24v Max temperature 500°C Stand by Circuit Temperature setting by front panel Input Flow volume setting by front panel Input |
Power: from 90w - (150w with one tool connected) Tool Voltage: 24v Max temperature 500°C Stand by circuit Temperature setting by front panel Input |
PUMP STANDARD: 12V 7,5 L/Min |
Fornitura standard Supply |
PUMP OPTIONAL: 24V - 21 L/Min |
For High Power models |
Tool you can connect
Models |
description |
standard/option |
tips - nozzles |
System F Iron |
Iron F |
standard supply |
|
ETH 24V AIR |
Hot Air Tool 200W |
standard supply |
nozzle included |
DUAL AIR: PLATFORM AIR + VACUUM - HOT AIR & DESOLDERING - MODEL ETF K P&S
Desoldering tool PTH -EDS LF 24V 80W with finger switch activation - Hot Air Tool model ETH 24 AIR with handle flow control
DESOLDERING SECTION |
HOT AIR SECTION |
| Power: 80w Tool Voltage: 24v Max. temperature 450°C Stand by Circuit Temperature management by front panel Input Software flow control - Vacuum level control |
Power: 200W Tool Voltage: 24v Max temperature 500°C Stand by Circuit Temperature setting by front panel Input Flow volume setting by front panel Input |
HIGH EFFICIENT PUMP: 12V 7,5 L/Min |
Standard Supply |
