Non contact soldering
Diode Laser Soldering System HPS 130
System: Main Unit - Control Box - Optical fiber transmitting system
- Lens
Specifications
Main Part
Work light source Diode Laser
Output
30 W, CW
Wave lenght
800-840 nm
Cooling
Air cooling
Energy transmitting Special lens and optical
fiber
Guide light source Diode
laser
Wave lenght
635 nm
Cooling
Air Cooling
Control Power
Input
100-230 VAC
Cooling
Air Cooling
Switch
Main Power switch key type switch
ON/OFF
Connector
(control box for sequence controller connection)
Input
Current setting
Pulse width setting
Pulse interval setting
Mode setting (Pulse oscillation/Continue oscillation/pulse train)
Trigger
Emergency stop
Output
Mode (Pulse oscillation/Continue oscillation/pulse train)
Laser ON
Ready - Alarm
Other
The adaptor (option) is required to connect PLC sequence controller
Connector (power ON)
Input
Available when the key is ON
Dimension
260W x 300D x 400H
Control Box
Output setting
2 digits sum rotary switch current - setting 0-40A (1A step)
Pulse width setting 3 digits sum rotary switch
timer - setting 10 ms-9,99s (10 ms step)
Pulse interval setting 2 digits sum rotary switch timer -
setting 10 ms-990 ms (10 ms step)
Button
Trigger (LED display)
Ready (Indication light/stabd by)
Pulse oscillation/Continue oscillation/pulse train
Emergency button
Alarm
LED Alarm
Cable
1,5 m
Dimension
140W x 115D x 25H mm
Optical fiber
lenght
2 m (25 pcs fiber)
Lens
Minimum concentration diameter - 0,8 mm
Work distance minimum
33 mm
Protection glass
Exchangeable
Dimension
140L x 115 diam mm
Working ambient
Temperature
25°C +/-5°
Humidity
55% +/- 15%
